Double Lock forming roll setup - Standard

The ESE K9 Power Seamer comes from the factory set to form a double lock standing seam.
The image on the right displays the forming roll setup for a double lock standing seam in one pass. In order to do a single (fascia) lock with the K9 seamer optional rolls must be installed to replace R3 and R4.

NOTE: unlike the ESE K9 Single Lock Power Seamer, a converted Double Lock can only travel in one direction on the roof.

 

 

 

 
 

Single Lock forming roll setup - Optional

This image shows the forming rolls required to form a single lock standing seam. When two additional R2's are installed in place of R3 and R4 the result will be a single lock.

The rolls required are:
part # 243C x 2

 


 
 
back to top
back to resouce menu
   
ESE Machines, Inc. 21 S. Caln Rd. Coatesville, PA 19320 ph.800.854.7361
v3.0 © 2008 ESE Machines, Inc.